Home » » Guide to Flash / Install Firmware Samsung GALAXY CORE LTE (SM-G386F) Using ODIN v3.11.1

Guide to Flash / Install Firmware Samsung GALAXY CORE LTE (SM-G386F) Using ODIN v3.11.1

Posted by Firmware Tech on Saturday, September 22, 2018

Guide to Flash / Install Firmware Samsung GALAXY CORE LTE (SM-G386F) Using ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY CORE LTE (SM-G386F). Now guidebelajar will show you guide to flash or set up a new firmware on Samsung GALAXY CORE LTE (SM-G386F) Using ODIN v3.11.1. If you upgrade your Samsung device the use of this approach you'll get too many risks. So, We endorse using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air) to improve your software program. Use this manual in case you are ninety six% sure approximately the risks worried in flashing your device. guidebelajar is not answerable for any damage resulting from following this manual.

This tool is released on 2014, May. Samsung GALAXY CORE LTE (SM-G386F) is the phone with 4,5 PLS capacitive touchscreen, 16M colours, paintings on Android OS, v4.2.2 (Jelly Bean), Supported with Dual-center 1.2 GHz CPU, blended with one thousand MB of RAM and a pair of MP of Main camera and VGA on secondary camera.

Preparation.

Below is the following belongings you need to do before flashing your Android Samsung Smartphone tool.
  1. Make certain your Samsung GALAXY CORE LTE (SM-G386F) is fully charged. Or minimal has 80 % of battery potential. It will keep away from the flashing system failure.
  2. Flashing system will delete or wipe all information stored in internal reminiscence. So, recall to backup all data earlier than flashing device.
  3. Make sure you have mounted a today's of the Samsung motive force, that support with your device If you don't have, you may download here
  4. Original USB cable motive force to your Samsung GALAXY CORE LTE (SM-G386F).
  5. Download Odin V3.Eleven.1, Here
  6. Download Official firmware record for the model variety of your device, down load it from - SamMobile, or you may visit samsung-updates.Com/
  7. Or you may read Guide How to Download Official Samsung Firmware From SamMobile. Here
  8. Firmware Samsung GALAXY CORE LTE, you have to Log In to down load firmware via this hyperlink.
    • SM-G386F - Spain, Romania, Netherlands, France, Hungary, Czech Republic, France, Poland, Bulgaria, Ireland - Here .
    • SM-G3518 - China (China Mobile) - Here

Guide To Flash Samsung GALAXY CORE LTE (SM-G386F)

  1. You have to down load all necessary record.(Samsung USB driving force and Odin)
  2. Then, installation all driving force on your pc or PC.
  3. Extract Odin V3.Eleven.1. File on the vacation spot folder.
  4. Switch Off your Samsung GALAXY CORE LTE (SM-G386F) to start flashing technique.
  5. Then, run Odin3 v3.11.1 with the aid of proper click on on Odin.Exe and choose Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY CORE LTE (SM-G386F)
  6. When this system is walking, now you can click AP, and navigate to the *.tar or *.Tar.Md5 firmware document.
    Flash Stock Firmware On Samsung GALAXY CORE LTE (SM-G386F)
  7. Now your firmware document has been inserted in Odin3
  8. Then, Enter download mode your Samsung GALAXY CORE LTE (SM-G386F). See this guide the way to do it.
  9. On this mode, now connect your Samsung GALAXY CORE LTE (SM-G386F) on your PC / computer the use of a USB cable.
  10. After your phone connected, you will see a message seem that show your device added and there's data at the ID: COM at top left nook. Keep in thoughts for this COM range depending on the PC / Laptop. Just Ignore all, on this image you'll see that your tool is detected on (COM five)
    Port Com Samsung GALAXY CORE LTE (SM-G386F)
  11. Make sure re-partition is NOT ticked
  12. When the whole thing already you can click on Start Button. at the lowest left corner
  13. Just await the system to run about 2-five minutes, and make certain there's no interference in this manner.
  14. When entire it's going to show a notification PASS and your smartphone Samsung GALAXY CORE LTE (SM-G386F) will mechanically restart.
  15. Wait to your device besides up, it's going to take a while.
  16. When your Samsung GALAXY CORE LTE (SM-G386F) is ready to use, now test your firmware model. See this guide how to check it.
  17. Finish.


  18. Warning.
    Never disconnect the USB cable at the same time as flashing method is walking.
    Install Samsung Mobile Driver or Samsung Smart Switch in case you don't see a register Odin.
    Flash your Samsung GALAXY CORE LTE (SM-G386F) device at your very own chance.
    Flashing firmware which contains more than one *.Tar.Md5 file will wipe all data on internal storage. Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung GALAXY CORE LTE (SM-G386F) tool's warranty.


0 comments:

Post a Comment

Popular Posts

Blog Archive

Powered by Blogger.
.comment-content a {display: none;}