Guide to Flash / Install Firmware Samsung GALAXY J3 (2016) Using ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY J3 (2016). Samsung GALAXY J3 (2016) Also known as Samsung Galaxy J3 (2016) with dual-SIM card slots, These guide beneath are the simple instruction to Flash / Install Firmware Samsung GALAXY J3 (2016) , On this manual we use ODIN v3.Eleven.1. You can follow this education under if you are ninety nine,9% sure approximately the risks concerned in flashing your Samsung device. If you need to upgrade your Samsung GALAXY J3 (2016) firmware, we advise the use of Samsung’s personal utilities OTA (Over-the-air) or Samsung Kies. Follow this guide simplest in case you understand approximately dangers concerned in flashing your Samsung GALAXY J3 (2016) device.

These are a few versions of Samsung GALAXY J3 (2016), J3109 (China); J320M; J320Y, J320A (AT&T), J320P (Virgin Mobile, Boost), J320F (EMEA). This device is launched on 2016, January. Samsung GALAXY J3 (2016) is the cellphone with 5,zero Inchi Super AMOLED capacitive touchscreen, 16M colorings, work on Android OS, v5.1.1 (Lollipop), Supported with Quad-core 1.5 GHz Cortex-A7 CPU, Spreadtrum SC9830 chipset, Mali-400 GPU, mixed with 1500 MB of RAM and 8 MP of Main camera and five MP on secondary digicam.

Preparation.

Below is the following belongings you need to do earlier than flashing your Android Samsung Smartphone tool.

1. Make sure your Samsung GALAXY J3 (2016) is absolutely charged. Or minimum has 89 % of battery ability. It will avoid the flashing process failure.
2. Flashing procedure will delete or wipe all facts stored in internal memory. So, bear in mind to backup all data before flashing tool.
3. Make positive you've got installed a present day of the Samsung motive force, that aid together with your tool If you don't have, you can download here
4. Original USB cable motive force for your Samsung GALAXY J3 (2016).
5. Download Odin V3.11.1, Here
6. Download Official firmware report for the version wide variety of your device, download it from - SamMobile, or you could go to samsung-updates.Com/
7. Or you can examine Guide How to Download Official Samsung Firmware From SamMobile. Here
8. Firmware Samsung GALAXY J3 (2016), you have to Log In to download firmware thru this hyperlink.
• SM-J320F - EMEA - Here
• SM-J320P - (Virgin Mobile, Boost) - Here
• SM-J3109 - China - Here
• SM-J320H - Saudi Arabia, Nigeria, Kazakhstan, Kenya, Germany, Vietnam - Here
• SM-J320N0 - Korea - Here
• SM-J320N0 - USA - Here

Guide To Flash Samsung GALAXY J3 (2016).

1. You need to download all necessary document .(Samsung USB driving force and Odin)
2. Then, installation all driver on your computer or PC.
3. Extract Odin V3.Eleven.1. File on the destination folder.
4. Switch Off your Samsung GALAXY J3 (2016) to start flashing procedure.
5. Then, run Odin3 v3.Eleven.1 by using proper click on Odin.Exe and pick Run as Administrator.

   Flash Stock Firmware On Samsung GALAXY J3 (2016)

6. When this system is running, now you may click AP, and navigate to the *.tar or *.Tar.Md5 firmware file.

   Flash Stock Firmware On Samsung GALAXY J3 (2016)

7. Now your firmware document has been inserted in Odin3

   Flash Stock Firmware On Samsung GALAXY J3 (2016)

8. Then, Enter download mode your Samsung GALAXY J3 (2016). See this guide the way to do it.
9. On this mode, now join your Samsung GALAXY J3 (2016) on your PC / pc using a USB cable.
10. After your cellphone related, you may see a message seem that display your tool added and there's info on the ID: COM at top left nook. Keep in mind for this COM vary depending at the PC / Laptop. Just Ignore all, in this photo you may see that your tool is detected on (COM five)

    Port Com Samsung GALAXY J3 (2016)

11. Make positive re-partition is NOT ticked
12. When everything already you can click on Start Button. at the bottom left corner
13. Just anticipate the procedure to run about 2-5 minutes, and ensure there's no interference on this process.
14. When whole it'll display a notification PASS and your telephone Samsung GALAXY J3 (2016) will mechanically restart.
15. Wait your device in addition up, it'll take a while.
16. When your Samsung GALAXY J3 (2016) is ready to apply, now test your firmware model. See this guide how to test it.
17. Finish.