Guide To Set Up TP Link (TL-WA500G) As DHCP Wireless Access Point.

Set Up TP Link (TL-WA500G) As Wireless Access Point. When we need to share an Internet connection for public, that each person on the blanketed area could have a connection to get admission to net. We need to want a Wireless Access Point. Wireless Access Point is a station that transmits and receives statistics. With this Access Point we will join all user or humans within the community, And also Wireless Access Point serve as the point of interconnection between the WLAN and a hard and fast twine connection on the community.

If you've bought a brand new Wireless Access Point , you must set it up earlier than you use to connect all user inside community. All person that hook up with your Access Point have to have an IP Address, so they may comunicate with the opposite person. This is a totally complicated as soon as in case you must set up one bya one a laptop or person that connect to your very own community. To remedy a complicated IP Address setup for every consumer, we have to use DHCP (Dynamic Host Configuration Protocol) .

Set Up TP Link (TL-WA500G) As DHCP Wireless Access Point.

By the use of DHCP on your Wireless Access Point set up, you may get more an advantage.

There isn't any need to manually configure every customer with an IP deal with.

We do nott want to maintain a report of the IP addresses which you have assigned.
We can robotically assign a new IP deal with in case you move a client to a one of a kind subnet.
We can launch the IP deal with of a pc that is offline and reassign the cope with to every other computer.
Address duplication is eliminated as DHCP automatically tracks IP cope with assignments.
The DHCP server can discover unauthorized DHCP servers on the network.

And now comply with this manual carefully to set up a Wireless Access Point on TP LINK (TL-WA500G).

Guide To Set Up TP Link (TL-WA500G) As DHCP Wireless Access Point.

Make sure you've got connected TP Link (TL-WA500G) for your laptop the usage of a community cable.
Make positive your Wireless Access Point is switch on.
Now, Start your windows computer, when geared up observe this subsequent manual.

Configure A Computer.

Now, we can configure our pc to speak with the Wireless Access Point. The AP and computers in your network have to be inside the identical IP Address variety without overlap with each other. And it's going to want a manually configure for your laptop community.

Connect the local PCs to the LAN ports at the Wireless Access Point and configure the IP address manually for your laptop.

Right click on at the network icon tray. It placed on the proper bottom of your window.

network icon

Then click Open Network and sharing centre.

open netwok and sharing center

It will open a Network And Sharing middle window, now, click Change adapter settings.

change adapter settings

Then on the new window, Right click on the Local Area Network icon and pick out properties.

Local location Network

On the Local Area Connections Properties window proven beneath, spotlight Internet Protocol Version four (TCP/IPv4) and click on Properties .

Internet Protocol Version four (TCP/IPv4) and click on Properties.

Then you need to enter quite a number to configure the IP Address manually.

Select Use the following IP cope with radio button.
Enter 192.168.1.X (x is any integer among 1 to 253) into the IP cope with. (in this manual we use Ip Address 192.168.1.2 for an instance.
filed, 255.255.255.0 into the Subnet masks

filed and 192.168.1.254 into the Default gateway filed.

filled IP Address Number on Internet protocol model 4

Click Ok to hold your settings.

Now, Verify the network connection between your pc and the Access Point through the Ping command. The following instance is in Windows Seven Operating System.

Press and hold Windows button on keyboard while press R to open Run command.
Now Enter cmd in the filed and click on Ok.
Type ping 192.168.1.254 on the display that presentations and then press Enter.

If the end result displayed is much like that proven in Figure underneath, the connection between your PC and the AP has been established.

Ping command for take a look at a connection

Configure A DHCP Wireless Access Point (TP LINK TL-WA500G)

when the computer configuration has completed, now you have to configure your Wireless Access Point. This manual will show the way to configure your Access Point thru the internet-primarily based management web page. You may additionally use Internet explorer, Mozilla firefox or Google chrome. Now follow this manual :

Log in on your Wireless Access point . Open your net browser, and Type //192.168.1.254 in the deal with area of net browser and press Enter.

type Ip address on deal with bar

Enter admin for the User Name and Password (each in decrease case letters) shown beneath Then click OK or press Enter.

Set Up TP Link (TL-WA500G) As DHCP Wireless Access Point.

Now, Select Wireless > Basic Settings it'll allow you to configure the simple settings for your wireless network, and you could supply your SSID call right here.

Set Up TP Link (TL-WA500G) As DHCP Wireless Access Point.

Then, pick out Wireless > Wireless Mode will permit you to set up the wi-fi mode for your wireless network suitable to your wishes.

Set Up TP Link (TL-WA500G) As DHCP Wireless Access Point.

Next choose Wireless > Security Settings it'll permit you to configure wi-fi safety for your wi-fi community to guard your records from intruders. The AP offers three safety kinds: WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK.

Set Up TP Link (TL-WA500G) As DHCP Wireless Access Point.

Next, pick DHCP > DHCP Settings it's going to permit you to set up the AP as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs which might be connected to the machine at the LAN.