How to Flash / Install Firmware Samsung GALAXY J3 PRO (2016) Using ODIN v3.11.1 | Guide

How to Flash / Install Firmware Samsung GALAXY J3 PRO (2016) Using ODIN v3.Eleven Guide.

Flash Stock Firmware Samsung GALAXY J3 PRO (2016). Use this approach handiest in case you understand what are the dangers posed flashing your tool. And this manual the usage of flash device for Samsung known as ODIN. If you handiest need to upgrade your Samsung GALAXY J3 PRO (2016) , we recommend using Samsung’s very own utilities OTA (Over-the-air) or Samsung Kies. Comply with this manual best if you recognize approximately dangers concerned in flashing your Samsung GALAXY J3 PRO (2016) tool.

This tool is released on 2016, June. Samsung GALAXY J3 PRO (2016) is the smartphone with five,2 Inch Super AMOLED capacitive touchscreen, 16M colorations, work on Android OS, v6.0.1 (Marshmallow), Supported with Octa-center (4x1.Five GHz Cortex-A53 & 4x1.2 GHz Cortex-A53) CPU, Qualcomm MSM8952 Snapdragon 617 chipset, Adreno 405 GPU, mixed with 4000 MB of RAM and sixteen MP of Main digital camera and 8 MP on secondary digital camera.

Preparation.

Below is the following things you must do before flashing your Android Samsung Smartphone tool.

1. Make sure your Samsung GALAXY J3 PRO (2016) is absolutely charged. Or minimal has 88 % of battery potential. It will avoid the flashing manner failure.
2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing tool.
3. Make sure you have hooked up a contemporary of the Samsung driving force, that help with your tool If you don't have, you may down load here
4. Original USB cable motive force to your Samsung GALAXY J3 PRO (2016).
5. Download Odin V3.Eleven.1, Here
6. Download Official firmware record for the version number of your tool, download it from - SamMobile, or you could go to samsung-updates.Com/
7. Or you can read Guide How to Download Official Samsung Firmware From SamMobile. Here
8. Firmware Samsung GALAXY J3 PRO (2016), you must Log In to download firmware via this hyperlink.
• SM-J320R4 - USA. Direct Link .

Guide To Flash Samsung GALAXY J3 PRO (2016)

1. You must down load all necessary file. (Samsung USB driver and Odin)
2. Then, installation all motive force in your laptop or PC.
3. Extract Odin V3.11.1. File in the destination folder.
4. Switch Off your Samsung GALAXY J3 PRO (2016) to start flashing manner.
5. Then, run Odin3 v3.11.1 by using proper click on Odin.Exe and choose Run as Administrator.

   Flash Stock Firmware On Samsung GALAXY J3 PRO (2016)

6. When the program is walking, now you could click AP, and navigate to the *.tar or *.Tar.Md5 firmware record.
7. Now your firmware file has been inserted in Odin3
8. Then, Enter download mode your Samsung GALAXY J3 PRO (2016). See this guide the way to do it.
9. On this mode, now join your Samsung GALAXY J3 PRO (2016) for your PC / computer using a USB cable.
10. After your smartphone linked, you will see a message appear that show your tool introduced and there may be data at the ID: COM at top left corner. Keep in thoughts for this COM vary relying on the PC / Laptop. Just Ignore all, on this picture you may see that your device is detected on (COM 5)

    Port Com Samsung GALAXY J3 PRO (2016)

11. Make sure re-partition is NOT ticked
12. When the whole lot already you can click Start Button. at the lowest left corner
13. Just anticipate the manner to run approximately 2-5 mins, and make sure there's no interference on this system.
14. When complete it'll display a notification PASS and your telephone Samsung GALAXY J3 PRO (2016) will robotically restart.
15. Wait on your tool as well up, it'll take a while.
16. When your Samsung GALAXY J3 PRO (2016) is prepared to apply, now take a look at your firmware version. See this guide how to test it.
17. Finish.