SP Flah Tool Error (Part 2) - What it's Mean And How to Fix this Errors.

SP Flah Tool Error (Part 2) - What it is Mean And How to Fix this Errors.

SP Flah Tool Error (Part 2). Here is list of an blunders on SP Flash Tool that seem throughout Android Phone Flashing method, formerly we have mentioned about type an blunders of SP Flash Tool Part 1 and this newsletter is a component 2. Actually there are numerous errors on SP Flash Tool that would appear when something is going wrong, Therefore, you ought to recognise what does the meaning every mistakes and clear up all problem issued on SP Flash device. So, flahing procedure get efficaciously with no blunders.

For folks that do no longer apprehend a way to use SP Flash Tool to flash Android device you could comply with this guide :

//pc-softwre.blogspot.com/search?Q=guide+how+to+use+sp+flash+device+

Error 8038 .

1. Error Message.
• Error 8038! Android download pmt is prepared and format has been changed
2. What is the that means ?
• SP Flash tool is having problem writing to sure partitions because of a few incompatibility
3. How to Fix it.
• Try to format Android Phone in SP Flah Tool, but do now not format the bootloader.
• Once it end, you may attempt flash it the use of Download.
• If Download does not paintings then do a firmware improve.
• Then, If the MTK backup contains a couple of scatter report, you can retry flashing with the alternative scatter file.
• Or attempt formatting first or use firmware upgrade
• If this manner nevertheless doesn't work, attempt to open the scatter file the usage of Notepad++ and change __NODL_FAT to FAT by means of putting off "__NODL_"

Error 4032.

1. Error Message.
• BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
2. What is the that means ?
• The firmware you are trying to flash is either no longer compatible along with your device or you have got decided on the incorrect flashing settings
3. How to Fix it.
• Make sure that the document you're trying to flash are according with the phone version.
• Don't forget to tick the boxes for only the files present inside the ROM you're about to flash.
• Make certain MT65xx Mediatek USB VCOM drivers is set up successfully, see this guide
• Try to apply clean extracted SP Flash device from Zip file, and delete the vintage one.
• Make certain the smartphone is switched off (If the smartphone has detachable battery, the battery need to nonetheless interior) before connecting to PC for flashing.
• Try to keep retaining down the volume down button earlier than connecting the cellphone to PC for flashing. (every smartphone might also range).
• Always replace using the state-of-the-art of SP Flah Tool version.

Error 5056.

1. Error Message.
• BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
2. What is the that means ?
• The length of a record (Stock ROM) is larger than the available / possible partition size
3. How to Fix it.
• Make sure that the document you're trying to flash are according with the phone version.
• You can attempt to use every other Stock ROM document.

Error 4001.

1. Error Message.
• S_FT_DA_NO_RESPONSE or
2. What is the that means ?
• this suggest that SP flash tool is having issue communicating with the Android tool.
3. How to Fix it.
• You can try to repair it by using change the USB-port for your PC or pc.
• Try to run SP flash device as Administrator.
• Make certain MT65xx Mediatek USB VCOM drivers is set up successfully, see this guide
• Try to flash your Android phone on any other PC or computer.
• Make positive the cellphone is switched off (If the telephone has removable battery, the battery should nonetheless inside) before connecting to PC for flashing.

Error 4008.

1. Error Message.
• BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
2. What is the that means ?
• SP Flash device application encountered an mistakes while attempting to flash files for your Android phone.
3. How to Fix it.
• Make positive the cellphone is switched off (If the telephone has removable battery, the battery should nonetheless inside) before connecting to PC for flashing.
• Always replace using the state-of-the-art of SP Flah Tool version.
• You can try to repair it by using change the USB-port for your PC or pc.
• Try to use the format choice then down load in SP flash tool

Error 3149.

1. Error Message.
• BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
2. What is the that means ?
• This error imply that SP Flash device become not able to flash files to the Android phone
3. How to Fix it.
• Always replace using the state-of-the-art of SP Flah Tool version.
• Try to apply the format option then download in SP flash tool
• Don't forget to tick the boxes for only the files present inside the ROM you're about to flash.
• Try to flash your Android phone on any other PC or computer.
• Try to use a unique Stock ROM
• Change your USB cable
• Try to apply the format option then download in SP flash tool

Error 3168.

1. Error Message.
• BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
2. What is the that means ?
• This mistakes mean that SP Flash read that at the flashing method there is a mismatch between the records provided in the scatter report and the cellphone's info.
3. How to Fix it.
• Make positive that the document (ROM) you're looking to flash are in accordance with the phone version.
• Always replace using the state-of-the-art of SP Flah Tool version.
• Make certain MT65xx Mediatek USB VCOM drivers is set up successfully, see this guide
• Make sure all motive force is hooked up correctly for your PC and Android smartphone.

Error 2004.

1. Error Message.
• BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)
2. What is the that means ?
• This mistakes suggest there has been an interruption in the conversation among SP flash tool and the Android tool.
3. How to Fix it.
• Try to alternate your USB cable.
• Try to alternate the USB-port for your PC or computer.
• Run SP Flash tool as Administrator.
• Right-click flash_tool.Exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack three > Click Apply > Click OK > Run SP flash tool as Administrator.
• Make certain the smartphone is switched off (If the smartphone has detachable battery, the battery need to nonetheless interior) before connecting to PC for flashing.