Guide to create Array and Logical Drive using HP Smart Storage Administrator (SSA)

Guide to create Array and Logical Drive the usage of HP Smart Storage Administrator (SSA).

Create Array and Logical Drive. This guide is a part of putting in Windows Server 2012 R2 on HP Proliant ML10 v2 server. To keep your Windows operating machine document on HP Proliant ML10 v2 server you need to create an Array and Logical Drive. Therefore we should set up the power set up on this server. For a beginner server consumer perhaps it makes so careworn and complicated to try this task. But we can explain this mission through the easy way so you can observe my manual to growing Array and Logical Drive the usage of HP Smart Storage Administrator (SSA).

We want this software ( HP Smart Storage Administrator) SAA to configuring array and create the logical pressure, you could down load this software manually from official Hewlett Packard internet site or you could get this software program blanketed on HP Service Pack for Proliant software. All software program is ISO photograph, so that you have to burn it into DVD or USB flash disk before using this software. If you have not created any logical drive on HP Proliant ML10 v2 server, you will see 0 Logical quantity at HP Dynamic Smart Array B120i RAID controller at pre booting display screen shown on the photo under.

HP Proliant ML10 v2 server - logical drive

Now, observe our guide cautiously to create Array and Logical Drive using HP Smart Storage Administrator (SSA).

Prerequisites.

1. DVD media or USB Flash disk.
2. You should d0wnload HP Service Pack for Proliant or SPP. From Here

   //h17007.Www1.Hp.Com/us/en/corporation/servers/merchandise/service_pack/spp/index.Aspx

   or Here .

   //weblog.Diploma.No/2015/04/hp-carrier-p.C.-for-proliantspp-when-you-dont-have-care-%/

   This is a huge record, for the brand new version (2015.10.Zero) has five.12 GB length. ( recommended )
3. For an opportunity, you could down load most effective Offline HP Smart Storage Administrator (HP SSA) 346 MB Here

//h20564.Www2.Hpe.Com/hpsc/swd/public/element?SwItemId=MTX_fac66a01809546579a9c3fd050

4. Once down load whole, switch this document to USB flash disk, and make it bootable stick.
5. You can study this guide to make Bootable USB flash disk the use of the HP USB key application for home windows.

//pc-softwre.blogspot.com/search?Q=guide+make+bootable+usb+flash+disk+HP+USB+key+utility

Guide to create Array and Logical Drive.

1. Make certain you've got changed boot order on HP Proliant ML10 v2 server , in addition from USB flash disk.
2. Once your server boot up to load your flash disk, you may see two alternatives must you pick out.
• Automatic Firmware Update Version 2015.10..0
• Interactive Firmware Update Version 2015.10.Zero
3. Now you should pick Interactive Firmware Update Version 2015.10.Zero than enter.
4. Wait for this system to load.

   HP carrier PAck ProLiant - load program

5. Then you'll see this for your display screen.

   HP carrier PAck ProLiant - load program

6. Now program will ask to select your language, via default it in English. Then click on on on on Accept to just accept the End User License Agreement (EULA)

   EULA - choose language
7. Then click on on next to keep.

   HP provider PAck ProLiant

8. Then you will see this photograph for your display screen, to begin to create Array and Logical Drive the use of HP Smart Storage Administrator (SSA), you should click on HP Smart Storage Administrator (SSA). This will configure, manipulate, and analysis for HP Smart array and storage works.

   HP Smart Storage Administrator (SSA)

9. Now, watch for the program to load HP clever storage.

   HP Smart Storage Administrator (SSA)

10. Now, you'll enter the HP Smart Storage Welcome display screen. On this display, you ought to click Dynamic Smart Array B120i RAID below Array Controller.

Dynamic Smart Array B120i RAID below Array Controller.

11. Then click on on Configure.

    Dynamic Smart Array B120i RAID - configure

12. Now, click Create Array.

    Dynamic Smart Array B120i RAID - create an array

13. Now, select bodily drives for the brand new Array.



Dynamic Smart Array B120i RAID - choose physical drives




14. Then you don't want to alternate any alternative on the subsequent display screen, simply click create a logical pressure.

    Dynamic Smart Array B120i RAID - create a logical drive

15. On the next screen you may be asked to preserve, Are you sure you want to hold? Just click yes.

    Dynamic Smart Array B120i RAID - create a logical drive

16. Once your process finished, now you may see a message on screen: Logical drive become effectively created, Please select one of the moves below. Now click Finish.

    Dynamic Smart Array B120i RAID - create a logical drive

17. Once finish, now you can see your logical drives below controller device.

    Dynamic Smart Array B120i RAID - controller device

18. Finish, you have created Array and Logical Drive using HP Smart Storage Administrator (SSA). Now you could close this window.
19. logical volume now created
    

    logical volume now created